Manway Canons





Split Manway Design

  • Proprietary design separating the camera and the canon system

  • Ease of deployment



Launch Cart

  • Self contained. No third party lifting equipment needed.

  • 2 person deployment operation



Nozzle Technology


  • Straight stream for material removal


  • Fog for degassing

Can change from straight stream to fog pattern remotely from command center.


3 Hydraulic Driven Nozzle options Available

  • 250 - 1000 GPM

  • 60 - 240 GPM

  • 30 - 120 GPM

Performance

  • 75-150 ft @ 100psi





Camera System

  • Pan and tilt, zoom and focus camera system

  • Independent mount from canon

  • Low light, white light and IR

  • Programmable system for camera and lighting

  • 2 - 4 TB of recording capacity

  • 275ft visual range

  • Can be used independent of canon system for visual inspection

  • Separate monitor may be used for mobile operations






Electric Systems

  • 3 phase 50 amp electrical system

  • 30 amp single phase in office area

  • 30 amp single phase in mechanical area


Hydraulic Systems

  • 50 gallon hydraulic tank

  • Cooling system for stabilizing fluid

  • Smart valve bank technology

  • Joy sticks are use sensor feedback


Ares Manway Cannons

Operational & Technical and Advantages


Ares manufactures all of its own products for quality control, performance, and robust

equipment that will not break down. Paired with our own technically advance nozzle

technology, ARES advantage provides the latest technology advancement available with

these self-contained systems, not needing lifting equipment to deploy.


SPLIT MANWAY VERSITILY IN DIFFERENT CANNON DEPLOYMENTS

Ares with its proprietary and originator of split manway design, uses two half plates so the

cannon can be installed separately from a camera system at a single entry point. This allows

for deployment through a 20 inch manway or larger. If Camera system is deployed separately

in a different location, or a specialty proprietary mount cannon can be deployed in a 16 inch

manway. A specialty designed launch cart is used, no additional lifting equipment is needed.


SEPARATE CAMERA MOUNTS FROM CANNON

Ares designs separates the cannon from the camera system, using Pan & Tilt / Zoom &

Focus, low light and IR. You don’t have to move the nozzle to see what is going on at a

different location from where you are working. Being able see the entire vessel helps operator

make critical decisions for best use of fluid. This also helps with operator tunnel vision

working just one spot fixated in just one location. This helps speed of operation of material

removal identifying the difficult spots, reducing future issues.


PROPRIETARY NOZZLE TECHNOLOGY

Ares has nozzles that go from a straight stream to a fog, all operated from the command

center. Changing streams is a simple as washing your driveway, using a concentrated

pattern straight stream to break up the hard material and a lessor stream to wash to location

of choice. This saves a lot of time and less influent fluid being used.

Several of these nozzles can also be adjusted to the gallon usage


FOGGING CHEMICAL APPLACATION

Using these nozzles for fogging a vessel for degassing speed the process up and save

thousands in time waiting for the proper air quality. The chemistry provided by you can be

fogged the entire atmosphere and/or injected into the material while a suction is being done

by degassing equipment.

It is common in material removal operations, after degassing, material removal starts, the

stirring up of the material releasing LELs exceeds acceptable limits, and material removal

operations is stopped. Chemistry can be injected into the material than fogging all controlled

from the command center. This will speed up the degassing process by not having down time

after degassing process has been completed. You will have a complete visual while

performing this operation.


NOZZLES OFFERED

Ares offers 3 different hydraulically driven nozzles, controlled from command center, go from

stream to fog, each having different GPM flow rates and general purpose use.


BIG NOZZLE HIGH FLOW: 250, 500 750 1000 GPM

This is used when you have lots of cutter stock available. Best used during startup. Can fog a

large area, and bust up large areas of difficult material quickly. Fixed flow rate nozzle

adjusted by the delivery pump GPM.


MEDIUM NOZZLE: 60.120,180,240 GPM

This is hydraulically driven stream to fog, with an adjustable GPM flow rate. GPM is set prior

to use. This will allow you to use a certain desired GPM to control amount of cutter used.

Used in the higher ranges straight stream is excellent for breaking up hard materials at closer

ranges 100 feet or less. Excellent final wash application at lower ranges.


ADVANTAGES OF HAVING DIFFERENT NOZZLE TECHNOLOGY

Being able to change flow rate and distance hitting power, spray patterns from the command

center is huge advantage, adding the different nozzles you have at your disposal on site,

guarantee the success of you project.


WE OFFER TWO DIFFERENT CAMERA SYSTEMS

One, a small light weight, with vision up to 150 to 200 feet. This has the easiest to clean and

quick deployment. Small powerful unit all enclosed in a single housing.

Second is larger with a little more weight for longer visual needs up to 300 feet. This is a

more complex unit with a separate lighting and camera housing on a single T post mount.

This is not recommended for high splash

Both units are excellent for low light / no light, 1080 High definition, full operational pan and

tilt zoom and focus from a controller in the command center.

Easily removed from the cannon system and can be put on mount of choice for application

needs, is an excellent piece of equipment for inspection of a job and/or project. Best use

before a project to inspect and confirm project specifications and conditions are correct.

This can also be used for hole watch during confined space entry.

Using the camera system as an inspection device will require a separate mobile power

supply and monitor. We have numerous options to that can be tailored to your needs.

All cameras systems are made of corrosive resistant alloy and coated for longevity of use.


COMMAND CENTER / TRAILERS / CONTAINERS

Our command centers are the best in the business. Insulated and covered with materials

stand up and built for years of field hard daily use, can be tailored to meet your specific needs


ARES ROBOTICS

The Best in Robotics / Proven Systems

Remotely Operated Vehicles & Stationary Operated Robotics

Call today for information on systems available for sales, rentals, and repairs.

713-320-4690